Basic Mission 6

Bad threads go here

Re: Basic Mission 6

Post by etgohomeok on Tue Sep 16, 2008 3:06 pm
([msg=11852]see Re: Basic Mission 6[/msg])

Heh, I just did this mission by trial and error, no hacking involved.

The key is very simple, and you can figure it out by putting in several of the same character. Once you have it, you can estimate what each character should be and plug it in to the encryptor, then adjust what character you're using by trial and error.
etgohomeok
New User
New User
 
Posts: 19
Joined: Tue Sep 16, 2008 3:04 pm
Blog: View Blog (0)


Re: Basic Mission 6

Post by Zelth on Tue Sep 16, 2008 7:10 pm
([msg=11873]see Re: Basic Mission 6[/msg])

pluch002 wrote:I am completley lost. ive went through like 10 pages and found nothing to help me... ive tried using the ascii table, and got nothing. converted my password in about 4-5 different ways and its still wrong


I think you should enter into the decryptor something like aaaaaaaa or bbbbbbbb or 11111111, yeah just giving ideas. Then you might be able to see the ...pattern? Oh and for me, I found the ASCII table useful in the end after finding out the pattern. :D
Z~Epsilon
Newbie Programmer
Learned: HTML, XHTML, CSS
Learning: PHP, C++
Zelth
Poster
Poster
 
Posts: 149
Joined: Mon Sep 08, 2008 7:45 pm
Blog: View Blog (0)


Re: Basic Mission 6

Post by MrJonn on Wed Sep 17, 2008 3:20 am
([msg=11893]see Re: Basic Mission 6[/msg])

To stop any of confusion here's a hint: Not everyone will need an ascii table for this.
Last edited by MrJonn on Fri Sep 19, 2008 6:46 am, edited 1 time in total.
MrJonn
New User
New User
 
Posts: 11
Joined: Tue Sep 09, 2008 7:34 am
Blog: View Blog (0)


Re: Basic Mission 6

Post by horizon123 on Thu Sep 18, 2008 4:13 pm
([msg=11987]see Re: Basic Mission 6[/msg])

There is something wrong with this part!
my code was "6699=im" and I did encrypt it! It comes out "65769dg"
When I enter this it does not accept it! I checked this solution many times and
controlled it on its own encryption machine and it did accept the resolution is "6699=im"
but when I submit it does not accept it! So, it must have been a bug or something!
horizon123
New User
New User
 
Posts: 1
Joined: Thu Sep 18, 2008 4:08 pm
Blog: View Blog (0)


Re: Basic Mission 6

Post by Zelth on Thu Sep 18, 2008 6:34 pm
([msg=12003]see Re: Basic Mission 6[/msg])

horizon123 wrote:There is something wrong with this part!
my code was "6699=im" and I did encrypt it! It comes out "65769dg"
When I enter this it does not accept it! I checked this solution many times and
controlled it on its own encryption machine and it did accept the resolution is "6699=im"
but when I submit it does not accept it! So, it must have been a bug or something!


What you entered what YOUR code. And it encrypted YOUR code. Therefore the encryption you got was 6699=im.
However, what you need to find is a code that, when you enter it into the encryptor, the code that comes out is 46f3h;=9.

There's a pattern: (if this is spoiler, notify me) If I enter aaaaaaaa into the encryptor, the code they give me will be abcdefgh.

That should lead you into the right direction...and possibly the answer.
Z~Epsilon
Newbie Programmer
Learned: HTML, XHTML, CSS
Learning: PHP, C++
Zelth
Poster
Poster
 
Posts: 149
Joined: Mon Sep 08, 2008 7:45 pm
Blog: View Blog (0)


Re: Basic Mission 6

Post by wildboy211 on Fri Sep 19, 2008 6:18 am
([msg=12021]see Re: Basic Mission 6[/msg])

IMO, 6 was easier than 5.
wildboy211
New User
New User
 
Posts: 2
Joined: Fri Sep 19, 2008 5:59 am
Blog: View Blog (0)


Re: Basic Mission 6

Post by trevp on Mon Sep 22, 2008 11:54 pm
([msg=12317]see Re: Basic Mission 6[/msg])

ok so i get the whole
aaaaaaaaaaaa= abcdfeghijkl.... and
1111111111111=123456789
but i just dot get how u get
a bunch of letters into something like xxxxxxxx or aaaaaaaaa
and algorithms i dont quit see in here....

P.S. i dont really understand how an algorithm would be for a computer i only know RUBIX CUBE algorithms :P
trevp
New User
New User
 
Posts: 10
Joined: Mon Aug 25, 2008 2:28 pm
Blog: View Blog (0)


Re: Basic Mission 6

Post by irmikeyb on Tue Sep 23, 2008 4:23 am
([msg=12328]see Re: Basic Mission 6[/msg])

Got it yay!
irmikeyb
New User
New User
 
Posts: 1
Joined: Tue Sep 23, 2008 4:18 am
Blog: View Blog (0)


Re: Basic Mission 6

Post by war devil on Tue Sep 23, 2008 4:30 am
([msg=12329]see Re: Basic Mission 6[/msg])

im sooooooooooo stuck!!! please, someone pm me!!!

ive done it!!!! its easy really, use the Ascii, its so much help! :D
war devil
New User
New User
 
Posts: 3
Joined: Mon Sep 22, 2008 10:40 am
Blog: View Blog (0)


Re: Basic Mission 6

Post by newby16 on Tue Sep 23, 2008 9:33 am
([msg=12341]see Re: Basic Mission 6[/msg])

im stuck :x

i use chart (you know what it is) but im still lost.... can someone help me?

part of the password 929ij7<@

encrypted is : 93;ln<BG
my decrypted is 94=orAHN

whats wrong? :evil:
newby16
New User
New User
 
Posts: 5
Joined: Tue Sep 23, 2008 5:38 am
Blog: View Blog (0)


PreviousNext

Return to Graveyard

Who is online

Users browsing this forum: No registered users and 0 guests